Advantech-DLoG DLT-V6210 Quick Start And Installation Manual page 5

5 Software configuration (e.g. Wireless)
Basic software settings for DLT-V6210 are defined at the factory, for example
with regard to Wi-Fi settings, network settings, etc. To adapt this, use the
configuration tool for the respective operating system:
WES7, WE8S,
Win 10 IoT Ent., etc.
WEC7
Linux
Find details in the configuration manuals at www.advantech-
dlog.com.
WARNING
Safety information about radiation emission.
This device emits high-frequency energy (abbreviation: HF). To protect people
from HF radiation and to comply with country-specific regulations:
− Install the DLT-V6210 so that persons maintain a minimum distance of
20 to 50 cm to the antenna.
− Observe the applicable regulations for your deployment location/country with
regard to channels, frequencies and the maximum permissible transmitting
power. Responsibility for this lies with the company operating the DLT-
V6210. The regulatory authorities in the relevant country can provide
information on this.
Any changes or modifications which are not expressly approved by the party
responsible for the compliance can lead to the withdrawal of the operating
license and guarantee for this device.
MDevice tool, etc.
WEC7 WLAN Client manager, etc.
ADLoG Standard Linux Image configuration.
Remark: DLT-V6210 with ADLoG Linux contains software
that is GPL licensed, e.g. the Linux kernel. You can, within
3 years, get the source code for those GPL programs from
ADLoG. Contact helpdesk@advantech-dlog.com.
5