Fixed Routed USB / KVM
The fixed USB routing feature allows a fixed USB link between a Multicast Receiver/s and a Transmitter. This can be
useful for sending KVM signals between a users position to a centrally located PC, server, CCTV DVR / NVR etc.
Rx Tx Gnd
CH SELECT
CH
MULTICAST UHD
RS-232
UPDATE
HDMI IN
IR
IR
DC IN
LAN / PoE
IN
OUT
24~56V
PC, server, CCTV NVR / DVR etc
USB Specifications:
USB Specification
Extension
Distance
Distance Ext.
Max Downstream Devices
Topology
USB R/W Performance *
Fixed Routed CEC
CEC or Consumer Electronic Command is a HDMI embedded control protocol that allows for commands to be sent
from one HDMI device to another for simple actions such as: Power, Volume etc.
The Blustream Multicast system allows for the CEC channel within the HDMI link between two products (source and
sink) to communicate with eachother using the CEC protocol.
CEC must be enabled (this is sometimes referred to as 'HDMI Control') on both the source device and the display
device in order for the Multicast system to communicate the CEC commands over the Multicast link.
Please note: the Blustream Multicast system will only transport the CEC protocol transparently. It is advisable to
ensure that the source and sink devices will communicate effectively before committing to this control type with
Multicast. Should an issue be experienced with CEC communication between the source and sink directly, this will
be mirrored when sending through the Multicast system.
contact
support@blustream.co.uk / support@blustream.com.au
IR
IR
LINK
USB
CH SELECT
IP200UHD-TX
OUT
1 USB 2
IN
AUDIO
USB
L / R
IN
LAN / PoE
LOOP OUT
USB2.0
Over IP, Hybrid redirection technology
100m
via Ethernet switch hub
5
1 to 1
1 to many exclusively (USBoIP)
1 to many simultaneously but limited number of USB devices (USBoIP)*
1 to many simultaneously Keyboard / Mouse (K/MoIP)
R: 69.6 Mbps
W: 62.4 Mbps
* Benchmark Reference: Read / Write USB to SATA HD without Multicast system R: 161.6 Mbps / W: 161.6 Mbps
Rx Tx Gnd
Rx Tx Gnd
LINK
CH SELECT
CH
RS-232
CH
MULTICAST UHD
UPDATE
RS-232
UPDATE
MULTICAST UHD
IP200UHD-RX
HDMI IN
HDMI OUT
AUDIO
IR
IR
DC IN
DC IN
L / R
LAN / PoE
IN
OUT
IN
24~56V
24~56V
ACM200
IR
IR
LINK
USB
CH SELECT
CH
IP200UHD-TX
OUT
IN
1 USB 2
HDMI OUT
USB
L / R
LAN / PoE
LOOP OUT
Keyboard / mouse
USER MANUAL
Rx Tx Gnd
LINK
RS-232
UPDATE
MULTICAST UHD
IP200UHD-RX
DC IN
L / R
24~56V
27
Need help?
Do you have a question about the Multicast ACM200 and is the answer not in the manual?
Questions and answers