Table of Contents
Advertisement
Installation -
Disassemble the camera
Before installing your camera, you have to read the following cautions.
. The mounting surface must bear fi e times the weight of your camera.
. Do not let the cables get caught in improper places or the electric line co er to be damaged. This may
cause a breakdown or fire.
. For the installation process, remo e the dome co er from the camera module by loosening the three
screws on the dome. se the wrench pro ided with the camera.
Reset Button
To re-attach the dome to the camera base, match the
one screw hole on the dome cover and camera
bottom specially.
Reset to the Factory Default
Press the reset button for 5 seconds to return the setup
to the factory default.
Warning:
If you press the 'Reset' button, you will lose all setting
data. If needed, please, make a note for further installation.
Advertisement
Table of Contents
