Table of Contents
Advertisement
Setup - Network Setup
SNMP Settings
11
SNMPv1/SNMPv2
1
Select the SNMPv1/SNMPv2 option and type the names of
Read community and Write community.
SNMP trap can be used to check periodically for operational
thresholds or failures that are de ned in the MIB.
SNMP Trap
2
SNMP trap can be enable or disable.
SNMPv3 contains cryptographic security, a higher security
level, which allows you to set the Authentication password
and the Encryption password.
Mode
3
Select the either Read or Read/Write mode.
4
Activation
It can be enable or disable selected mode.
5
Read/Write name
De ne Read name and Write name.
6
Security Level
Select one of no auth, no priv/auth , no priv/auth, priv
Authentication Algorithm
7
Select MD5 or SHA as the authentication method.
8
Authentication Password
The Authentication Password is an encryption for
authentication and they are at least 8 digits and up
to 30 digits allowed.
Private-Key Algorithm
9
Select DES or AES as the encryption algorithm.
10
Private-Key Password
Information protection password is a private encryp
-tion and they are at least 8 digits and up to 30 digits
allowed.
11
Click 'Apply' to make above setting e ective.
4
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
