Table of Contents
Advertisement
Installation -
Disassembling the camera
Before installing your camera, read the following cautions.
1. Make sure the mounting surface can hold up to five times the weight of your camera.
2. Do not let cables get caught in improper places or the electric line cover gets damaged.
It may cause a breakdown or fire.
3. When installing your camera, do not allow any unauthorized personnel to approach the
installation site. If you have any valuable things under the place, move them away.
To reset the camera, detach the ball module from the
1
base by rotating it counter-clockwise.
Do not touch any other parts of the camera.
Press the reset button on the base of the camera's lens module.
2
Pressing the button for five (5) seconds will initiate a
camera-wide reset of all the settings, including
network settings.
When replacing the camera's ball module into place,
make sure no cables are caught or got disconnected.
Rotate the ball module clockwise until it is secured in place.
Warning:
If you press the 'Reset' button, you will lose all setting
data. If needed, please, make a note for further installation.
7
Advertisement
Table of Contents
