Digital Watchdog MEGApix DWC-MV72Wi28A User Manual page 15

Network Setup -
DW IP Finder™
Go to: http://www.digital-watchdog.com
Search for 'IP Finder' on the quick search bar at the top
of the page.
The latest DW IP Finder™ software will appear in the
search results. Click on
the link to download the file to your computer.
The software will scan your network for all supported
cameras and display the results in the table. Allow up to 5
seconds for the DW IP Finder™ to find the camera on the
network.
5 Check the bo ne t to Display Camera Thumbnail to
iew a P G image of the camera s iew ne t to the
camera name on supported models.
Select a camera from the list by double-clicking on the
camera's image or clicking on the 'Click' button under the
IP Conf. column. The camera's network information will
appear. If necessary, you can adjust the camera's
network type.
Select 'D CP' if the internet ser ice is dynamic IP to allow the
camera's network information to be filled out automatically.
Select 'Static' to manually enter the camera's network
information. ou can adjust the camera's network type, IP
address, subnet mask, Gateway and D S information.
Contact your network administrator for more information.
The camera s default network information is:
Default TCP/IP information
- IP: D CP
To view the camera's web client, click on 'View Camera Website'.
A 'Port Forwarding' has to be set in your network's router for
external access to the camera.
To save the changes made to the camera's settings, input ID and
PW of the camera for authentication.
If the camera needs to be rebooted after the settings were changed,
press the 'Reboot' button. The camera will power cycle and will
appear back in the search results once the reboot is complete.
Default ID / PW : admin / admin
Click 'Save' to save changed values.
To update the camera's rmware from the DW IP Finder™,
click on the rmware tab, upload the rmware le and
select the cameras to update. You can update multiple
cameras at the same time.