Installation -
Disassemble the camera
Before installing your camera, you have to read the following cautions.
2. Don't let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
3. When installing your camera, don't allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
BOTTOM- CABLE HOLE
1
Detach the dome cover by torx wrench provided from
bottom case before installation the camera.
GASKET-CABLE HOLE POINT
UPPER-SENSOR HOLE POINT
Reset to the Factory Default
Press the reset button for 5 seconds to return the setup
to the factory default.
Warning:
If you press the 'Reset' button, you will lose all setting
data. If needed, please, make a note for further installation.