Fire-Lite Alarms MS-5210UD Manual page 81

History Mode
Shown below is the list of messages as they will appear on the display:
History Mode Messages
TABLE 5-1:
DISPLAY EVENT
ACn_ Acknowledge key pressed
A__! Zone 1 Alarm
A__2 Zone 2 Alarm
A__3 Zone 3 Alarm
A__4 Zone 4 Alarm
A__5 Zone 5 Alarm
A__6 Zone 6 Alarm
A__7 Zone 7 Alarm
A__8 Zone 8 Alarm
A__9 Zone 9 Alarm
A_10 Zone 10 Alarm
SU_1 Supervisory 1 Alarm
SU_2 Supervisory 2 Alarm
SU_3 Supervisory 3 Alarm
SU_4 Supervisory 4 Alarm
SU_5 Supervisory 5 Alarm
SU_6 Supervisory 6 Alarm
SU_7 Supervisory 7 Alarm
SU_8 Supervisory 8 Alarm
SU_9 Supervisory 9 Alarm
SU10 Supervisory 10 Alarm
PA_1 Process Alarm Zone 1
PA_2 Process Alarm Zone 2
PA_3 Process Alarm Zone 3
PA_4 Process Alarm Zone 4
PA_5 Process Alarm Zone 5
PA_6 Process Alarm Zone 6
PA_7 Process Alarm Zone 7
PA_8 Process Alarm Zone 8
PA_9 Process Alarm Zone 9
PA10 Process Alarm Zone 10
_AC_ AC Loss
F__1 Zone 1 Fault
F__2 Zone 2 Fault
F__3 Zone 3 Fault
F__4 Zone 4 Fault
F__5 Zone 5 Fault
F__6 Zone 6 Fault
F__7 Zone 7 Fault
F__8 Zone 8 Fault
F__9 Zone 9 Fault
F_10 Zone 10 Fault
bEL1 Bell 1 Fault (open or short)
bEL2 Bell 2 Fault (open or short)
bEL3 Bell 3 Fault (open or short)
bEL4 Bell 4 Fault (open or short)
2
To erase the list from E memory, press the SILENCE key twice before exiting the History Mode. A lack of key-
board activity for a period of 10 minutes will cause the control panel to return to Normal Mode. If a printer is con-
nected to the panel, the History File will be printed upon successful entry into History Mode and a list of the most
recent 256 events, time and date stamped, will print out.
Note that remote site upload or download is possible when the system is in History Mode.
DISPLAY EVENT
F__E Earth Fault
F__A Annunciator Fault
F__P Printer Fault
F_85 Annunciator Bus Fault
d__1 Zone 1 disabled
d__2 Zone 2 disabled
d__3 Zone 3 disabled
d__4 Zone 4 disabled
d__5 Zone 5 disabled
d__6 Zone 6 disabled
d__7 Zone 7 disabled
d__8 Zone 8 disabled
d__9 Zone 9 disabled
d_10 Zone 10 disabled
drLL Fire Drill
E__1 Enable Zone 1
E__2 Enable Zone 2
E__3 Enable Zone 3
E__4 Enable Zone 4
E__5 Enable Zone 5
E__6 Enable Zone 6
E__7 Enable Zone 7
E__8 Enable Zone 8
E__9 Enable Zone 9
E_10 Enable Zone 10
d_b1 Disable bell 1
d_b2 Disable bell 2
d_b3 Disable bell 3
d_b4 Disable bell 4
E_b1 Enable bell 1
E_b2 Enable bell 2
E_b3 Enable bell 3
E_b4 Enable bell 4
PH_1 Primary C.S. Number Communication Fault
PH_2 Secondary C.S. Number Communication Fault
no_b No Battery
Lo_b Low Battery
SILE Silence Switch Pressed
SIL1 NAC/Bell #1 Silenced
SIL2 NAC/Bell #2 Silenced
SIL3 NAC/Bell #3 Silenced
SIL4 NAC/Bell #4 Silenced
no_1 Primary Phone Line Fault
no_2 Secondary Phone Line Fault
rES_ Reset Switch Pressed
POr_ Power On Reset (unit was powered off
completely, i.e. no AC and no battery)
Document #50193 Rev. E 01/30/02 P/N 50193:E
81