Dimensions; Installation - SMC Networks EX500 Series Instruction Manual

Dimensions ( unit: mm )
When only input blocks for M8 connector are connected
L2 ( Rail mounting pitch: 12.5 )
Stations 1
L1 [mm]: Rail length 98
L2 [mm]: Mounting pitch 87.5
L3 [mm]: Manifold length 74
L4 [mm] 12
When only input blocks of 8-point-integrated type are connected
Stations
L1 [mm]: Rail length
L2 [mm]: Mounting pitch
L3 [mm]: Manifold length
L4 [mm]
26
DIN Rail
L3 (L4)
5
L1
2 3 4 5 6
110.5 123 135.5 148 160.5
100 112.5 125 137.5 150
86 98 110 122 134
12 12.5 12.5 13 13
1 2
135.5 185.5
125 175
110 158
12.5 13.5
When only input blocks for M12 connector are connected
7 8
173 185.5
Stations
162.5 175
L1 [mm]: Rail length
146 158
L2 [mm]: Mounting pitch
13.5 13.5
L3 [mm]: Manifold length
L4 [mm]

Installation

Connect each connector of Input unit, input blocks,
and end block ( portion indicated by arrow in the
figure to the right ).
Holding with hands so that there will be no gap
between blocks, place the jointed unit and blocks on
DIN rail.
Tighten the bolts of Input unit and end block to
secure the jointed unit and blocks to DIN rail.
Be sure to tighten the bolts by proper tightening
torque. ( Tightening torque: 0.6Nm )
L3
L2 ( Rail mounting pitch: 12.5 )
L1
1 2 3 4 5
110.5 123 148 173 185.5 210.5
100 112.5 137.5 162.5 175
82 102 122 142 162
12 12 12.5 12.5 13
DIN Rail
(L4)
5
6 7 8
223 248
200 212.5 237.5
182 202 222
13 13.5 13.5
27