Excessive Temperature Test Result; Specifications Of Components - Mcube CUBEscan BioCon-900S Operator's Manual

TRANSMITTER
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Components conformance to standards
9.2.5
To maintain electromagnetic interference (EMI) within certified limits, the device must be used with the
cables, components specified or supplied by Mcube Technology. The use of cables or compoments other
than those specified or supplied may result in increased emissions or decreased immunity of the system.
Compoment
Power Cord

EXCESSIVE TEMPERATURE TEST RESULT

9.3
Transducer type →
Test to be applied ↓
Simulated use test
Still air test
(no gel)

SPECIFICATIONS OF COMPONENTS

9.4
WIRELESS CHARGING
9.4.1
Main Chipset
Coil type
d = 1.2√ ��
0.12
0.38
1.2
3.8
12
EMC standards
Adapter
Temperature rise
Temperature rise
TI (BQ500210RGZ)
1 Coil (A10)
TM
CUBEScan BioCon-900S Operator's Manual
d = 1.2√ ��
0.12
0.38
1.2
3.8
12
Max length
1.83 m(6ft)
1 m (3.3ft)
External use
The ambient temperature : 22.8 ℃
The temperature rise to: 24.6 ℃
The ambient temperature : 23.1 ℃
The temperature rise to: 25.5 ℃
d = 2.3√ ��
0.23
0.73
2.3
7.3
23
Page 54