Pre-Scan Settings; Delete All Measurements - Mcube CUBEscan BioCon-900S Operator's Manual

Tap the Setup icon (
1)
screen, if you want.
Use the Next icon (
2)
Tap the Brightness Item (eg.50%, 60%, 70%) repeatedly to adjust display brightness (0%-100%).
3)
NOTE: The display brightness setting affects battery life. To conserve battery life, adjust brightness to a
lower setting
Figure 69 Brightness Setup

PRE-SCAN SETTINGS

7.6
Tap the Setup icon (
1)
to return to the Home screen, if you want.
Use the Next icon (
2)
Turn the Pre-scan on (
3)
Figure 70 Pre-scan On/Off Setting

DELETE ALL MEASUREMENTS

7.7
) on the Home screen. Tap the Home icon (
) on the Setup screen, and look for Brightness option(
) on the Home screen to open the Setup screen. Tap the Home icon (
) on the Setup screen, and look for Pre-scan option(
) or off ( ) by tapping the Light Item (
TM
CUBEScan BioCon-900S Operator's Manual
) to return to the Home
).
).
or )
Page 41
)