Dialog Boxes - Mcube CUBEscan BioCon-900S Operator's Manual

TM
CUBEScan BioCon-900S Operator's Manual

DIALOG BOXES

6.11
Windows Description
Confirm Message: "Are you sure you want to delete this saved scan result?"
Confirm Message: "Are you sure you want to delete all saved measurements?"
Confirm Message: shutdown mode – To prevent the probe from discharging.
"Are you sure you want to go into shutdown mode?"
Alert Message: The message prompts you when calibration is needs.
Alert Message: The battery is nearly depleted and needs to be recharged.
Alert Message: The battery needs to be recharged immediately, so the probe
goes to sleep mode soon by shutting itself down
Alert Message: The temperature of oil inside the probe is below 10°C.
So the thermostat inside probe makes the oil warm and the temperature of oil
rises above 10°C. See the section "8.2 DIALOG BOXES FOR MAINTENANCE"
for more information
Page 38