Re-Aim Bladder; Save A Scan Result - Mcube CUBEscan BioCon-900S Operator's Manual

RE-AIM BLADDER

5.7
If the bladder is not centerd in the target or too small, you can re-aim and re-scan the bladder before
saving the scan result. We strongly recommend that you re-aim and re-scan more than one time for
accuracy.
Figure 33 Incorrectly Positioned
The crosshair helps how to re-aim and the guiding arrows show that the user has to move or tilt the probe
for a more accurate scan. If the bladder appears in the center of the crosshair, press the Scan Button
or tap the Pre-scan part of the screen.
Figure 34 How To Re-aim

SAVE A SCAN RESULT

5.8
When you do not need to scan again, you can save the currently displayed scan result. And also missing
scan result can be saved after fetching the missing scan result. See the section "5.9 FETCH A MISSING
DATA".
To save the scan results, tap the Save icon (
scan result is saved successfully.
TM
CUBEScan BioCon-900S Operator's Manual
) below the display. The Home screen appears after the
Page 28