Fetch A Missing Data; Finish The Measurement; Manage Saved Scan Results - Mcube CUBEscan BioCon-900S Operator's Manual

FETCH A MISSING DATA

5.9
If you did not save a scan result and return to the Home screen, the Missing Data icon (
the Home screen. Tap the Missing Data icon (
screen on the missing data appears. The performances below make the Missing Data icon(
1) Fetch and save the missing scan result.
2) A new normal scan is performed.
Figure 35 Home Screen

FINISH THE MEASUREMENT

5.10
After finishing scanning, take the probe away from the patient and then wipe the ultrasound gel off the
probe. See the section "8.3 CLEANING & DISINFECTION"
When the probe is not in use, press the Power Button(
then mount it for charging internal battery in the Charger.

MANAGE SAVED SCAN RESULTS

5.11
1) The scan results are saved to the internal memory of BioCon-900S Probe. If you scan the patient
several times using the probe, the lagest result is saved. Information can be entered and modified before
the scan result is saved, but once the scan result is saved, patient information can not be modified
2) If you want to delete the saved scan result, see the section "5.11.2 DELET A SAVED SCAN RESULT"
REVIEW A SCAN RESULT
5.11.1
1) The Review screen is displayed when you tap the Review icon (
2) The Review screen opens, it shows the urine volume, ultrasound images and other saved information.
3) Previous & Next icon (
4) Delete & Exit icons (
screen.
5) Tap the (1) area to review the information you entered for the patient.
, ) allow you to review the scan results of the other patients.
, ) allow you to delete the current reviewing results or return to the Home
TM
CUBEScan BioCon-900S Operator's Manual
) to fetch the unsaved scan result. The Scan Result
) twice to place the system in sleep mode and
) on the Home screen.
) appears on
) disappear.
Page 29