Clock Inputs; Audio Codec; Vga Output; Serial Ports - Altera Cyclone II Reference Manual

Fpga starter development board
Table of Contents

Advertisement

Altera Corporation
October 2006
A switch produces logic 0 when in the DOWN
(closest to the edge of the board) position
and logic 1 when in the UP position

Clock Inputs

50-MHz oscillator
27-MHz oscillator
24-MHz oscillator
SMA external clock input

Audio CODEC

Wolfson WM8731 24-bit sigma-delta audio CODEC
Line-level input, line-level output, and microphone input jacks
Sampling frequency: 8 to 96 KHz
Applications for MP3 players and recorders, PDAs,
smart phones, voice recorders

VGA Output

Uses a 4-bit resistor-network DAC
15-pin high-density D-sub connector
Supports up to 640x480 at 60-Hz refresh rate
Can be used with the Cyclone II FPGA to implement
a high-performance TV encoder

Serial Ports

One RS-232 port
One PS/2 port
DB-9 serial connector for the RS-232 port
PS/2 connector for connecting a PS2 mouse
or keyboard to the board

Dual 40-Pin Expansion Headers

72 Cyclone II I/O pins and 8 power and ground lines
connect to two, 40-pin expansion connectors
40-Pin header designed to accept a standard 40-pin
ribbon cable used for IDE hard drives
Resistor protection provided
Reference Manual
Cyclone II FPGA Starter Development Board
Introduction
1–9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cyclone II and is the answer not in the manual?

Table of Contents

Save PDF