Rfid Car Alarm Functions And How To Use - GPS Tracker TK510 User Manual

TK510 GPS Vehicle Tracker
SMS command: 111111BOX:Email
(Example: 111111BOX:topten800@gmail.com )

RFID Car Alarm Functions and How to use

V.
It is the optional function, the extra RFID reader module & tag are needed.
It supports 2 types of RFID reader: (1)2.4G long distance reader/reader
module(3-8meters); (2) Mifare1 IC card reader (reading distance 3-6cm)
Our active RFID reader module & RFID tag are designed with 2.4G wireless
technology. The working distance is from 3-8 meters, our active RFID tag has
very low power consumption & its battery can work for more than 1 year.
It is not only used for driver ID identification, but also as a key to arm/disarm
the vehicle automatically.
2.4G Reader
 RFID Reader
Please insert the RFID reader to the USB port of the main unit, and fix the
reader box tightly on the place where it is not hot.
 RFID Tag
Please press the power switch on the tag & hold it for 3 seconds, if the LED
light changes from ON to flash, it means the tag is power ON; if the LED light
change from ON to OFF, it means the tag is power OFF.
Each tag has a unique 6-digits ID on the sticker.
It is the long-distance active RFID tag, the battery of the tag can work for
more than 1 year. User can change the tag's battery easily once finished.
2.4G tag
Page 16
User Manual
Mifare1 IC card reader