GPS Tracker TK510 User Manual page 13

TK510 GPS Vehicle Tracker
It is to set the hear-beat time interval. (in minutes)
Pair the wireless
immobilizer
It is to pair the wireless immobilizer (optional functions)
Check &set parameter
together
The above command is used to check the parameters together. To set the parameter, please
use 1111111SET:1:(password),2:(over-speed),3:(time
meters),5:(movement
111111SET:1:111111,2:120,3:0,4:8660,5:100,6:0,
Geo-fence Alarm
Remarks: 017 is for alarm when tracker moves out the preset scope; 117 is for alarm when
tracker moves in.
When the tracker moves in/out, it will send a SMS alarm to the authorized phone number.
X is the coordinates which include:
Lower-left X,Lower-left Y,Upper-right X,Upper-right Y
For example, 11404.0000,E,2232.0010,N,11505.1234,E,2333.5678,N
Note:
1. Lower-left X should be less than Upper-right X;
2. All longitudes and latitudes should be in ASCII format as follows:-
Longitude: DDDMM.MMMM,E/W. 4 places of decimal. „0‟ is needed to be stuffed if no value
available.
Latitude: DDMM.MMMM,N/S. 4 places of decimal. „0‟ is needed to be stuffed if no value
available;
3. Only one alarm can be set in either Movement Alarm or Geo-fence Alarm;
4. Send W******,006,00 to turn off Geo-fence function.
Get IMEI number
Remarks: to get the IMEI number of tracker‟s GSM module
******STD
******SET:
radius),6:(power
W******,017,X
W******,117,X
******CMD:AT+GSN
Page 12
111111STD
111111SET:
zone),4:(odometer
save mode),
W111111,017,
11404.0000,E,2232.0010,N,
11505.1234,E,2333.5678,N
111111CMD:AT+GSN
User Manual
in
example: