GPS Tracker TK510 User Manual page 23

Gps vehicle tracker (rfid + camera)
Table of Contents

Advertisement

TK510 GPS Vehicle Tracker
Activate the impulse output5, SMS command: 111111LCK1,
Adjust the time T of impulse output4/output5, SMS command:
111111NUM:9:T,
Installation Notes:
 We strongly recommend you to ask the professional car electrician to do
the installation.
 Please prepare a valid GSM SIM card in advance.
 IMPORTANT: Please do not insert or pull out the SIM card when the
main unit has power. Before doing this operation, please disconnect the
outside power supply lines, and turn off the internal backup battery‟s
switch firstly. The wrong operation might damage the main unit.
 Please fix the main unit at secret place to avoid being destroyed by theft.
Please keep it away from the high-temperature, humidity or strong
magnetic object. Please fasten it tightly.
 While mounting the GPS antenna, the flat magnetic side must be placed
downside. There could not be any metal or shielded obstacles around
the upside of the GPS antenna, so that it can receive the satellite signal
from upside the sky very well, the GPS antenna should be placed at
broad & secret place too. It should be drew straight and kept away from
the sound box or speaker.
 While mounting the GSM antenna, it should be placed at broad & secret
place where there is no shielded obstacle.
 The GSM antenna can‟t be placed along with the GPS antenna in
parallel. It should be drew straight and kept away from the sound box or
speaker.
(T is the time, in seconds, default: 3 seconds)
Page 22
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents