GPS Tracker TK510 User Manual page 12

TK510 GPS Vehicle Tracker
It is to set the initial odometer reading. (X: meters)
111111ODO: is to read the present odometer reading (with : at the end)
Set multiple parameters
Example: in above example: x=888888 is operation password, y=2 is over-speed, z=8 is time
zone, u=1000 is the initial odometer, v=50 is radius of movement alert, w is power save
mode(=pwr:1,2,3)
Check the settings: 111111SET:
Lock/unlock the door
Example: x=0 or x=1
111111LCK0: lock the car door
111111LCK1: unlock the car door (the output5 has the pulse output)
Track by distance
111111LOG:5:X,
X=0: Track by time interval (default settings) ;
111111EQU:Y
Y is the distance interval for automatic tracking
Clear the Parameters
Remarks: it will reset the GPRS settings & shock sensor to default settings, it will clear the
alarm-received phone number and direct monitoring phone no.
Clear the Data logger
Remarks: it will format the cache of the memory and delete all the stored offline GPS data
Set Fuel-loss alarm
Remarks: it will set the reduction offset X of fuel level in 10 seconds. it is used to adjust the
sensitivity of triggering fuel-loss alarm.
Reboot the tracker
The device will reboot 1 minutes later.
Set Hear-beat time
******SET:1:x,2:y,3:z,4:u
,5:v,6:w,
(with : at the end)
******LCKx
(the output4 has pulse output)
******LOG:5:X,
******CLR
******NUL
******OIL:X
******DOG:!
******HBX:X
Page 11
111111SET:1:888888,2:120,3:8,4:10
00,5:50,6:2,
111111LCK0
111111LOG:5:1,
X=1: Track by distance
111111CLR
111111NUL
111111OIL:10
111111DOG:!
111111HBX:3
User Manual