Resume The Oil And Power System (Option); Tracker's Hardware Resetting; Alarm Function And Settings; Geo-Fence - GPS Tracker TK-104 User Manual

cell phone from the tracker device, and stop your car engine as well, at the same time. It
will remain the immobile state until receiving the next SMS command of resuming the oil
and power once receiving SMS command to cut off the oil and power system.
14.

Resume the Oil and Power System (Option)

Send SMS "resume+password" to the unit, It will reply "Resume engine Succeed"
and resume your car engine as well, at the same time. It will remain this state until
receiving the next SMS command to cut off the oil and power system once receiving
SMS command to resume the oil and gas system.

Tracker's Hardware Resetting

15.
Send SMS "reset+password" to tracker device to reset the GSM module and GPS
module of the tracker device, it will reply "reset ok".
IV.

Alarm Function and settings

All the alarms will be send to all the authorized phone numbers once the alarms
are triggered in SMS mode, if the tracker keep in triggered status and alarms are
not be cancelled, tracker will keep sending alarms to authorized phone numbers
every 3 minutes. If tracker works in GPRS mode instead of SMS mode, tracker
will send alarms to web based online system.

1. Geo-fence

1.1 Set up a geo-fence for the tracker device to restrict its movements within a district.
The unit will send SMS to the authorized numbers when it goes out of this district.
Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send
SMS "stockade+password+space+latitude,longitude;latitude,longitude" to unit to set the
restricted district. In case of breach, it will send SMS "stockade!+geo-info" to
the authorized numbers. Tracker will stop sending alarm if tracker returns to
the fence after geo-fence triggered
1.2 Cancel: Send SMS "nostockade+password" to deactivate this function.

2. Movement Alarm

Movement alarm refers to the alarm which will be triggered if tracker device move
beyond a certain distance. (Default distance is 200 meters.)
Setup: when the unit stays immobile in a place for 3-10 minutes, the user can send
SMS "move+password" to the tracker device. It will reply "move ok!". In case of
breach, movement alarm will be triggered, and tracker will send SMS "Move" along
with a Geo-info to the authorized numbers.
Cancel: Send SMS "nomove+password" to deactivate the movement alarm.
10