Distances Between The T:slim X2 Pump And Rf Equipment - Tandem t:slim X2 User Manual

32.8 Distances Between the t:slim X2 Pump and RF Equipment

The t:slim X2 Insulin Pump is intended for use in an electromagnetic environment typically found in the home, at work, retail stores,
and places of leisure, where daily activities occur. The chart below can be used as a guideline for determining the recommended
minimum distance to maintain between a radio frequency (RF) transmitter and the t:slim X2 Insulin Pump. For specific concerns
about a particular RF transmitter interfering with your System's operation, please contact the transmitter manufacturer for its rated
power and frequency.
Rated Maximum Output Power
of Transmitter in Watts
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance (d) in meters (m) can be determined using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects, and
people.
Customer Technical Support: (877) 801-6901
Separation Distance According to Frequency of Transmitter
150 kHz to 80 MHz
(d = 1.2P)
0.12
0.38
1.2
3.8
12
Chapter 32 – Technical Specifications
in meters
80 MHz to 800 MHz
(d = 1.2P)
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
(d = 2.3P)
0.23
0.73
2.3
7.3
23
289