Setting Your Out Of Range Alert - Tandem t:slim X2 User Manual

NOTE: Turning the Alert Off
To turn off the Fall Alert, tap OFF/ON.
7. Tap 2 mg/dL/min to select.
 Once a value is selected, the pump
will return to the previous screen.
8. Tap SAVE.
Tap SAVE.
20.6 Setting Your Out of Range
Alert
The range from the transmitter to the
pump is up to 20 feet without obstruc-
tion.
The Out of Range Alert lets you know
when your transmitter and pump are
not communicating with each other.
Keep the transmitter and the pump
within 20 feet of each other without
obstruction. When the transmitter and
pump are not communicating, you will
not get sensor glucose readings or
alerts. The default value is off; 30 min-
utes if on.
The Out Of Range symbol appears on
the pump Home Screen and on the Out
Customer Technical Support: (877) 801-6901
of Range Alert screen (if turned on)
when the transmitter and pump are not
communicating. The amount of time
out of range also shows on the alert
screen. It will continue to re-alert until
the transmitter and pump are back in
range.
To Set Your Out of Range Alert:
1. From the Home Screen, tap
OPTIONS.
2. Tap My CGM.
3. Tap CGM Alerts.
4. Tap Out of Range.
The default value is off; 30 minutes
if on.
5. To select the default of 30 min, tap
SAVE.
To change the time, tap Alert After.
6. Using the onscreen keypad, enter
the time after which you want to be
alerted (between 20 minutes and 3
Chapter 20 – Setting CGM Alerts
hours and 20 minutes) then tap
DONE.
7. Tap SAVE.
191