Directional Signals; Hazard Light Switch; Steering; Operator Presence Switch - Taylor-Dunn 2018 BIGFOOT G-1500 Operator's Manual

Table of Contents

Advertisement

MB-440-09

Directional Signals

Directional signals are optional and may not be
installed on your vehicle.
The turn signal lever is located on the left side
of the steering column. Push the lever forward
to activate the right turn signal and pull the lever
back to activate the left turn signal.
Note: The switch is not self canceling and must
be manual turned off.

Hazard Light Switch

Hazard lights are optional and may not be
installed on your vehicle.
The hazard light switch is located on the left side
of the steering column. The switch is a small tab.
To activate the hazard lights, pull the tab out. To
turn the hazard lights off, push forward or pull
back the directional signal lever.

Steering

The steering wheel and steering system are
similar to an automobile. To turn right, turn the
steering wheel clockwise. To turn left, turn the
steering wheel counter-clockwise.

Operator Presence Switch

A switch located under the driver's seat kills the
engine when the driver leaves the seat. The
driver must be seated for the engine to operate.
Whenever the driver leaves the vehicle, the
driver should turn the ignition switch off, place
the shift lever in the neutral position, and set
the park brake.
Bigfoot G-1500 Operator Manual
Page 21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B5-440-gas

Table of Contents