Vehicle Maintenance; Daily Inspection; Pre-Operation Inspection - Taylor-Dunn C0-425-48 Operator's Manual

Daily Inspection

The following items should be inspected once every day before the vehicle is put into service:
• External frame damage (body).
• Operation of all lights, warning alarms.
• Smooth and proper operation of seat belts (if equipped).
• Inspect for leaking fluids or grease.
• Tire tread or sidewall damage.
• Smooth and proper operation of all controls such as but not limited to:
• Throttle pedal
• Brake pedal
• Steering
• Horn
• Parking brake
• Etc.
• Proper operation of all locking devices such as but not limited to:
• Tool box
• Removable battery trays
• Battery lid (seat frame)
• Cargo box
• Cab doors
• Etc.
• Proper operation of all interlocking switches such as but not limited to:
• Start switch
• Operator presence switch
• Etc.

Pre-Operation Inspection

The following items should be inspected every time before the vehicle is driven:
• Confirm all removable seat cushions are correctly installed and secured in position. .
• Rear and side view mirror adjustments.
• Steering operation.
• Brake operation (service and park brake).
• Tire pressure (visual inspection only).
• Trailer hitch operation, latch, and wear.
WARNING
Remove cargo before raising the vehicle or the battery lid. Failure to remove the cargo
may result in cargo falling from the vehicle causing severe personal injury and/or
property damage.
Page 38

Vehicle Maintenance

Huskey C-425 Sevcon DC System Operator Manual
MC-425-12