Removable Batteries; Lift Out Battery Box (Lobb) Or Industrial Battery - Taylor-Dunn C0-425-48 Operator's Manual

MC-425-12

REMOVABLE BATTERIES

Removable batteries can consist of a single large industrial battery or a pack of smaller batteries
assembled on a removable tray.
The removable battery can be of a type that slides or rolls out of the side of the vehicle (ROBB) or
lifted out of the vehicle from above (LOBB).
WARNING
• Use the proper equipment when handling and transporting removable batteries.
Equipment that is used to lift and support removable batteries should be rated
at a minimum of 1.5 times the total battery weight.
• Keep all body parts out from underneath any battery that is not installed and
latched in the vehicle.
Failure to follow these rules may result in severe bodily injury and/or property
damage.
WARNING
Before removing a battery pack or industrial battery:
1) Park the vehicle on a level surface. If removing a ROBB, the vehicle should be
positioned as close as possible to the platform where the battery will be stored.
2) Place the Direction Control switch in the center OFF position.
3) Make sure the Start switch is in the OFF position.
4) Set the park brake.

Lift Out Battery Box (LOBB) or Industrial Battery

Removing the LOBB will require an overhead hoist or forklift attachment not included with the
vehicle. Refer to the manufacturer of the hoist or attachment for proper operation.
1. Unplug the battery connector.
2. Attach the hook from the hoist or forklift attachment to the lifting eye on the battery box.
3. Lift the LOBB until it is clear of the frame.
4. Place the battery on the ground or battery storage platform.
5. If the battery is to be moved away from the vehicle, then it should first be lowered as close
as practical to the ground before transporting.
Huskey C-425 Sevcon DC System Operator Manual
Page 43