Safety Instructions; Range Of Application; Maintenance; Warnings And Notes - AUMA ABG 10.2 Operation And Maintenance Manual

1. Safety instructions

Range of application

AUMA bevel gearboxes GK 10.1, ABG 10.2 – ABG16.2 operate valves (e.g. gate valves and globe
valves).
These gearboxes are designed for manual operation. For other applications, please consult AUMA. The
manufacturer is not liable for any possible damage resulting from use in other than the designated
applications. Such risk lies entirely with the user. Observance of these operation instructions is
considered as part of the designated use.

Maintenance

The maintenance instructions (refer to page 5) must be observed, otherwise a safe operation of the bevel
gearbox is no longer guaranteed.

Warnings and notes

Failure to observe the warnings and notes may lead to serious injuries or damage. Qualified personnel
must be thoroughly familiar with all warnings and notes in these operation instructions. Correct transport,
proper storage, mounting and installation, as well as careful commissioning are essential to ensure a
trouble-free and safe operation.
The following references draw special attention to safety-relevant procedures in these operation
instructions. Each is marked by the appropriate pictograph.
This pictograph means: Note!
"Note" marks activities or procedures which have major influence on the correct operation. Non-
observance of these notes may lead to consequential damage.
This pictograph means: Warning!
"Warning" marks activities or procedures which, if not carried out correctly can affect the safety of persons
or material.
Page 3 of 12