Table of Contents
Advertisement
Other Transmission Features
B Enter the PWD code then press
[OK].
3
Note
❒ You can enter up to 20 char-
acters.
❒ You can enter digits 0-9, q,
p and spaces. To enter a
space, press [Space] (the first
character cannot be a space).
❒ If you incorrectly enter the
code, press the { { { { Clear} } } } key or
{ { { { Stop} } } } key and try again.
❒ Make sure that the ID you
en ter con forms w ith th e
specifications of the other
party's fax machine.
I I I I
Press [OK].
Note
❒ To cancel the operation, press
[Cancel] and the display will re-
turn to standby mode menu.
J J J J
Press the { { { { Start} } } } key.
The connection is established and
the reception starts.
82
Sub-address
The optional ISDN Unit is required to
use this function
ISDN allows two or more terminals
(such as a fax and digital telephone)
to be connected to a single line. These
terminals are identified by their sub-
address numbers. If the terminals
connected to the line at a destination
are assigned sub-addresses, dialing a
sub-address allows you to direct your
fax message to one or more particular
terminals at the destination.
Preparation
You need to assign the Sub-ad-
dress feature to a User Function
key beforehand. See p.154 "User
Function Keys"
Limitation
❒ Sub-address can only be used with
ISDN.
Note
❒ You can program a sub-address
number in a Quick Dial key or
Speed Dial.
A A A A
Select G4 or ISDN-G3.
Reference
p.89 "Selecting the Line"
B B B B
Set the original and select any
scan settings you require.
Advertisement
Table of Contents
