Table of Contents
Advertisement
Other Transmission Features
G G G G
Press the { { { { Start} } } } key.
Note
❒ When in Immediate Transmis-
sion, if the other party does not
support this function, an error
message appears on the display.
SEP/PWD (SEP Code Polling
Transmission)
3
Normally you can only use Polling
Transmission/Reception between fax
machines of the same make that have
the Polling Transmission/Reception
feature. However, if the other ma-
chine supports a similar feature
called SEP/PWD, you can send faxes
or receive messages using this polling
method instead.
You can also use SEP Code Polling
Transmission to retrieve documents
stored in information boxes regis-
tered in other fax machines.
Preparation
You need to assign the Dial Op-
tions feature to a User Function
key beforehand. See p.154 "User
Function Keys".
Note
❒ The ID can be up to 20 digits long
and consist of digits, spaces, p
and q.
❒ You can also store the SEP Codes
in addition to the other parties
names and fax numbers in Quick
Dial keys, Speed Dials, or Key
Stroke Programs.
❒ Messages you send using this fea-
ture are marked "SEP" on the re-
ports below:
• File Reserve Report (Memory
Transmission)
See p.107 "File Reserve Report
(Memory Transmission)".
80
• File Reserve Report (Polling Re-
ception)
See p.21 "File Reserve Report
(Polling Reception)".
❒ Make sure that the ID you enter
conforms with the specifications of
the other party's fax machine.
Reference
p.22 "Polling Transmission"
p.19 "Polling Reception"
p.251 "Information Boxes"
p.63 "Quick Dial", <Basic Fea-
tures>
p.76 "Speed Dial", <Basic Fea-
tures>
p.87 "Groups", <Basic Features>
p.136 "Program/Delete Menu"
A A A A
Press [Mode].
The Transmission Mode menu ap-
pears.
B B B B
Enter the code for "Polling RX"
with the number keys.
Note
❒ If "Polling RX" is not displayed,
press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next] until it
is.
Advertisement
Table of Contents
