Reception Functions; Transfer Station - Savin 3799 Operating Instructions Manual

Reception Features

Reception Functions

Transfer Station

Transfer Stations allow you to expand
the standard features of your fax ma-
chine to set up complex networks.
The diagram below may make the
concept clearer.
4
Requesting party
Transfer Result Report
The following terminology is used in
this section:
❖ ❖ ❖ ❖ Requesting Party
The machine where the message
originates from, i.e. the machine
making a Transfer Request.
❖ ❖ ❖ ❖ Transfer Station
The machine that forwards the in-
coming message to another desti-
n a t i on , i. e . th e m a chi n e t h a t
receives the Transfer Request. In
this section this refers to your ma-
chine.
❖ ❖ ❖ ❖ End Receiver
The final destination of the mes-
sage, i.e. the machine that the
Transfer Station sends to. End Re-
ceivers must be programmed into
Quick Dial keys, Speed Dials or
Groups in the Transfer Station
(this machine).
114
End Receiver
Transfer Station
End Receiver
End Receiver
GFCYUK0N
Preparation
Store the end receiver fax numbers
beforehand in the Transfer Sta-
tion's Quick Dial keys, Speed Dials
or Groups. See p.63 "Quick Dial",
<Basic Features>, p.76 "Speed Di-
al", <Basic Features> and p.87
"Groups", <Basic Features>.
You need to program the Request-
ing Party's fax number in either a
Quick Dial key or Speed Dial of the
Transfer Station's machine (this
machine) beforehand.
Limitation
❒ Polling IDs of the Requesting Party
and Transfer Station must be iden-
tical for this feature to work. See
p.199 "Registering ID Codes".
❒ The return address must be regis-
tered with Transfer Station(s) be-
forehand. See p.202 "Transfer
Report".
❒ When programming the Request-
ing Party's fax number in Speed
Dial, only the numbers "000" to
"099" are available even though
Optional Function Upgrade Unit is
installed.
Note
❒ This machine will not receive a
Transfer Request unless it has
enough free memory to store two
or more destinations dialed from
the number keys. See p.46 "Enter-
ing Numbers Directly", <Basic
Features>.
❒ If one of the specified end receivers
is not registered in the Transfer
Station, the transfer is halted.