Table of Contents
Advertisement
Key Operator Settings
Note
❒ You can choose to only lock
messages from Specified Send-
ers, or lock all messages except
those from Specified Senders.
Adjust this setting with User
Parameters. See p.178 "User Pa-
rameters"(switch 09 bits 1, 0).
P P P P
Press [OK].
Q Q Q Q
Press [PrevMenu] twice.
R R R R
Press [Exit] to return to the stand-
by mode.
Deleting Specified Senders
You can delete registered Specified
Senders as necessary.
Reference
See p.239 "Deleting Specified
Senders" for the deleting proce-
7
dure.
Printing the Specified Sender List
You can check the registered Speci-
fied Senders by printing out the list of
the registered Specified Senders.
Reference
See p.241 "Printing the Specified
Sender List" for the printing proce-
dure.
236
TX/RX File Save Settings
This function requires the optional Func-
tion Upgrade Unit and Optional 40MB
Memory Card.
Use this function to have messages
from Specified Senders received us-
ing the TX/RX File Save function. If
you do not register any Specified
Senders, all messages will be received
using the TX/RX File Save function.
Note
❒ It is recommended that you print
the Specified Sender List and keep
it after registering or editing set-
tings for this function. See p.217
"Printing the Specified Sender
List".
❒ Register the Own Name or Own
Fax Number of the other party as
the Specified Sender. If the other
party has not registered their Own
Name or Own Fax Number, you
cannot register them as a Specified
Sender.
❒ You can choose to save only mes-
sages from Specified Senders, or
save all messages except those
from Specified Senders with User
Parameters. See p.178 "User Pa-
rameters" (switch 09 bits 3,2).
❒ You can register the Specified
Senders for the following six func-
tions: Multi-copy Reception, Au-
thorized Reception, Specified
Tray, Forwarding, Memory Lock,
TX/RX File Save. The maximum
number of Specified Senders is 50.
Advertisement
Table of Contents
