Table of Contents
Advertisement
Other Transmission Features
Backup File Transmission
When turned on, this feature sends a
backup copy of all faxes you send to
destinations that you specify.
Preparation
You must specify the backup desti-
nations beforehand. See p.243
"Backup File Transmission Set-
tings" .
3
Note
❒ This function works with the fol-
lowing features:
• Memory Transmission
See p.34 "Memory Transmis-
sion", <Basic Features>.
• Transfer Request Transmission
See p.28 "Transfer Request".
• Confidential Transmission
See p.7 "Sending Confidential
Messages".
• SUB Code Transmission
See p.13 "SUB Code Transmis-
sion with the Mode Key".
• Mail Transmission (NIC FAX
Unit (Option for Type1) re-
quired)
102
JBIG Transmission
If you use JBIG (Joint Bi-level Image
Experts Group) compression you can
send photographic documents at
high speed.
Normally, the JBIG method is used
when sending to other fax machines.
However, if connected to multiple
lines and another JBIG transmission
is in progress, transmission takes
place without using JBIG.
Limitation
❒ This feature requires that the other
party's fax machine has both the
JBIG function and ECM function
(G3 communication only).
❒ When connected to multiple lines
and a JBIG transmission is in
progress, JBIG transmission is not
possible until that transmission
has finished.
❒ This feature is not available with
an e-mail transmission when NIC
FAX Unit (Option for Type1) in-
stalled.
Reference
p.42 "Scan Settings", <Basic Fea-
tures>
Advertisement
Table of Contents
