Table of Contents
Advertisement
Key Operator Settings
Network Settings
Use of these settings requires the NIC
FAX Unit (Option for Type1).
Adjust these settings to set up the In-
ternet Fax Feature (Option for Type1).
For details, see Chapter 1, "Network
Settings" in the NIC FAX Unit manu-
al.
IP-Fax Parameter Settings
Use of these settings requires the NIC
FAX Unit (Option for Type1).
Adjust these settings to set up the IP-
Fax Feature (Option for Type1).
For details, see Chapter 1, "IP-Fax Pa-
rameter Settings" in the NIC FAX
Unit manual.
7
System Parameter Transmission
This feature sends information about
the condition of your machine to your
nearest service representative. Follow
these steps when your service repre-
sentative requests you to.
Note
❒ This information is sent to the des-
tination registered in your ma-
chine by a service representative.
❒ This information is sent directly
from the machine's memory to
your service representative.
A A A A
Press the { { { { User Tools} } } } key.
204
B B B B
Enter the code for "Key Op.
Tools" with the number keys.
Then press the { { { { q
The "Key Op. Tools" main menu
appears.
C C C C
Enter the code for "System Set-
tings" with the number keys.
D D D D
Enter the code for "System Param.
TX" with the number keys.
Note
❒ If "System Param. TX" is not dis-
played, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next]
until it is.
E E E E
Press the { { { { Start} } } } key.
The fax number registered by a
service representative appears.
The standby screen is displayed
when the transmission is com-
plete.
q
q } } } } key.
q
Advertisement
Table of Contents
