Checking The Transmission Result (Tx Status) - Savin 3799 Operating Instructions Manual

Communication Information
Checking the Transmission Result (TX
Status)
If you wish to find out whether a file
was sent successfully, you don't have
to always print the Journal. With this
2
function you can browse through the
last 250 completed transmissions on
the display.
Note
❒ If a transmission is completed
while you are using this function,
the result will not be shown until
you exit TX Status and start it
again.
❒ Only the last 250 transmissions are
shown. Earlier transmissions are
not available.
❒ When the optional Function Up-
grade card is installed, you can
check up to 1,000 communications.
A A A A
Press [Info.].
The "Information" menu is shown.
B B B B
Enter the code for "TX Files Sta-
tus" with the number keys.
Note
❒ If "TX Files Status" is not shown,
press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
44
C C C C
When you have finished, press
[OK].
Note
❒ The results are shown two at a
t i m e w i t h t h e m o s t r e c e n t
above.
❒ Press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next] to scroll
through the list.
D D D D
Press [Exit].
The standby display is shown.