Printing The User Parameter List; G3 Analog Line - Savin 3799 Operating Instructions Manual

Note
❒ If you press [Cancel], the display
in step D reappears.
❒ The bits are displayed in as-
cending order from right to left,
the right most bit being bit 0.
❒ Some items use multiple bits for
their settings such as "Image
density adjustment level."
H H H H
Press [PrevMenu] twice.
I I I I
Press [Exit] to return to the stand-
by mode.
Printing the User Parameter
List
Print the User Parameter List manual-
ly to check the current User Parame-
ter settings.
A A A A
Press the { { { { User Tools} } } } key.
B B B B
Enter the code for "Key Op.
Tools" with the number keys.
Then press the { { { { q
The "Key Op. Tools" main menu
appears.
C C C C
Enter the code for "System Set-
tings" with the number keys.
q } } } } key.
q q
D D D D
Enter the code for "Prt. User
Param." with the number keys.
E E E E
Press the { { { { Start} } } } key to print the
list.
Note
❒ If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step D appears again.
F F F F
Press [PrevMenu] twice.
G G G G
Press [Exit] to return to the stand-
by mode.

G3 Analog Line

You need to make settings for the G3–
1 Analog Line before you connect the
machine to a standard G3 analog line,
and for the G3–2 Analog Line to con-
nect to a G3 analog line by installing
the optional Extra G3 Interface Unit.
❖ ❖ ❖ ❖ G3–1 Analog Line
• Own Fax Number (CSI) (up to
20 digits)
Register an international identi-
fication number as your Own
Fax Number (Called Station
Identification), which is passed
to the other party when you
send or receive a fax.
• PSTN Line Type
Select whether the connected
line uses tone or pulse dialing.
System Settings
7
189