Setting Up Tx/Rx File Save - Savin 3799 Operating Instructions Manual

❒ You can use up to 20 characters
when registering one item of Spec-
ified Senders for the G3 communi-
cation, and 24 characters for the G4
communication. You can also spec-
ify wildcards. See p.98 "Entering
Characters", <Basic Features>.
❒ If the Specified Sender's fax ma-
chine is of the same make as your
machine, register the sender's
name registered to their machine.
If the Specified Sender's fax ma-
chine is of a different make, regis-
ter the fax number.
❒ You can check the sender's name
or sender's fax number registered
to the fax machines of Specified
Senders on the Journal. See p.50
"Printing the Journal".
❒ You can change the current setting
by following the same procedure
for making a new setting. Change
the values of settings according to
your needs.
Reference
p.58 "TX/RX File Save"

Setting up TX/RX File Save

A A A A
Press the { { { { User Tools} } } } key.
B B B B
Enter the code for "Key Op.
Tools" with the number keys then
press the { { { { q q } } } } key.
q q
The "Key Op. Tools" main menu
appears.
C C C C
Enter the code for "Initial Set Up"
with the number keys.
The "Initial Set Up" menu appears.
D D D D
Enter the code for "TX/RX File
Save" with the number keys.
Note
❒ If "TX/RX File Save" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next]
until it is.
E E E E
Press [Sender].
Note
❒ If you do not wish to register a
Specified Sender, proceed to
step O.
❒ If you do not register any Speci-
fied Senders, all incoming faxes
are received using TX/RX File
Save.
F F F F
Enter the code for "Program Send-
er" with the number keys.
Initial Set Up
7
237