Exiting Energy Saver Mode; Selecting The Energy Saver Mode Type; Reception In Energy Saver Mode - Savin 3799 Operating Instructions Manual

Appendix

Exiting Energy Saver Mode

Your machine exits Energy Saver Mode when a fax is received.
To exit Energy Saver Mode manually:
• In Energy Saving Standby mode, press the { { { { Clear Modes/Energy Saver} } } } key.
• In Fax Standby mode, press any key.
• Place an original.
• Pick up the optional Handset.
• Pull out the main paper tray.
• Open the ADF unit or ADF cover.
• Open the side cover.

Selecting the Energy Saver Mode type

To select the Energy Saver Mode type, adjust the bit switch below with User Pa-
rameters. See p.178 "User Parameters" (switch 05 bit 6).
❖ ❖ ❖ ❖ Switch 05 Bit 6
• Energy Saving Standby: To let the heating roller cool to room temperature,
set bit 6 to 0.
• Fax Standby: To let the heating roller cool halfway set bit 6 to 1.

Reception in Energy Saver Mode

Once in Energy Saver Mode, you can still receive messages. When a message is
received, the machine prints it and returns to Energy Saver Mode.
10
302