Transfer Request - Savin 3799 Operating Instructions Manual

Transmission Mode

Transfer Request

Transfer Request allows fax machines
to automatically distribute incoming
1
messages to multiple fax destina-
tions. This feature helps you reduce
costs when you send the same mes-
sage to more than one place in a dis-
tant area, and saves time since many
messages can be sent in a single oper-
ation.
Requesting
party
The following terminology is used in
this section.
❖ ❖ ❖ ❖ Requesting Party
The machine where the message
originates from.
❖ ❖ ❖ ❖ Transfer Station
The machine that forwards the in-
coming message to another desti-
nation.
❖ ❖ ❖ ❖ End Receiver
The final destination of the mes-
sage.
Preparation
Before you can use this feature you
must program the Polling ID and
set the Transfer Report. See p.199
"Registering ID Codes" and p.202
"Transfer Report".
28
End Receiver
Transfer
Station
End Receiver
Transfer
Result Report
End Receiver
Limitation
❒ The Transfer Stations you specify
must be machines of the same
make as this machine and have the
Transfer Station function.
❒ This function is not available un-
less the End Receiver's fax number
is stored in either a Quick Dial key
or Speed Dial of the Transfer Sta-
tion.
❒ This function is not available un-
less the Transfer Station's fax num-
ber is stored in either a Quick Dial
key or Speed Dial of the Request-
ing Party's machine (this machine).
❒ Make sure that the return address
is set up correctly in the Transfer
Station's machine to use this func-
tion.
GFCYUI0N
Note
❒ You can specify up to 100 Transfer
Stations and 30 End Receivers in a
Transfer Request.
❒ When you specify Group Dials
stored in the Transfer Station as re-
ceivers, one Group Dial is counted
as one End Receiver.
❒ Polling IDs of the requesting party
(this machine) and Transfer Sta-
tions must be identical.
A A A A
Set the original and select any
scan settings you require.