Table of Contents
Advertisement
User's Guide
Running Web Config on a Web Browser
1. Check the printer's IP address.
Select Setup > Network Settings > Network Status from the home screen, and then check the printer's IP
address.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the maintenance screen of Epson iPrint.
Related Information
"Using Epson iPrint" on page 60
&
Running Web Config on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Config.
1. Access the devices and printers screen in Windows.
❏ Windows 10
Right-click the start button or press and hold it, and then select Control Panel > View devices and printers
in Hardware and Sound.
❏ Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
❏ Windows Vista
Click the start button, and select Control Panel > Printers in Hardware and Sound.
2. Right-click on your printer and select Properties.
3. Select the Web Service tab and click the URL.
Running Web Config on Mac OS X
1. Select System Preferences from the
then select the printer.
Network Service and Software Information
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
93
Advertisement
Table of Contents
