Epson PM-520 series User Manual page 89

User's Guide
❏ Wi-Fi Direct Setup
Connects the printer to a wireless (Wi-Fi) network without a wireless router.
Manual Network Setup:
Changes the network settings, such as the device name or TCP/IP.
Connection Check:
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the report to solve the problem.
Related Information
"Checking the Network Connection Status" on page 25
&
"Making Wi-Fi Settings Manually" on page 20
&
"Making Wi-Fi Settings by Push Button Setup" on page 21
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 22
&
"Disconnecting Wi-Fi Direct (Simple AP) connection from the Control Panel" on page 28
&
Menu Options for Epson Connect Services
Select the menus on the control panel as described below.
Setup > Epson Connect Services
Status:
Check whether or not the printer is registered and connected to the Epson Connect services.
Email Address:
Check the printer's email address that is registered to the Epson Connect services.
Register/Delete:
Register or delete the printer to or from the Epson Connect services.
Suspend/Resume:
Select whether to suspend or resume Epson Connect services.
For usage guides, see the following portal website.
https://www.epsonconnect.com/
http://www.epsonconnect.eu
Related Information
"Epson Connect Service" on page 92
&
Menu Options for Setup Mode
(Europe only)
89