Table of Contents
Advertisement
User's Guide
Related Information
"Checking the Network Connection Status" on page 25
&
Making Wi-Fi Direct Simple AP Settings
This method allows you to connect the printer directly to computer or smart devices without an access point. The
printer acts as an access point.
Important:
c
When you connect from a computer or smart device to the printer using the Wi-Fi Direct (Simple AP) connection,
the printer is connected to the same Wi-Fi network (SSID) as the computer or smart device and the communication
is established between them. Since the computer or smart device is automatically connected to the other connectable
Wi-Fi network if the printer is turned off, it is not connected to the previous Wi-Fi network again if the printer is
turned on. Connect to the printer's SSID for Wi-Fi Direct (Simple AP) connection from the computer or smart
device again. If you do not want to connect every time you turn the printer on or off, we recommend using Wi-Fi
network by connecting the printer to an access point.
1. Select Wi-Fi setup on the home screen, and then press the OK button.
2. Select Wi-Fi Direct, and then press the OK button.
3. Press the OK button.
4. Press the OK button to start the setup.
Note:
❏ This step is skipped when the device has already been connected over a Wi-Fi Direct (Simple AP) connection.
❏ If this is the first time the device has been connected, you can change the password for the Wi-Fi Direct (Simple AP)
connection. Press the
connecting the device, disconnect it and then setup the password again.
d
5. Press the
button to show the SSID and password.
6. Check the SSID and password displayed on the printer's control panel. On the network connection screen of
the computer or smart device, select the SSID shown on the printer's control panel to connect.
7. Enter the password displayed on the printer's control panel on the computer or smart device.
8. After the connection is established, press the OK button on the printer's control panel.
9. Press the
button.
Related Information
"Checking the Network Connection Status" on page 25
&
Making Advanced Network Setting
You can change the network device name, TCP/IP setup, DNS server and so on. Check your network environment
before making changes.
Network Settings
d
button and follow the on-screen instructions. If you want to change the password after
23
Advertisement
Table of Contents
