Table of Contents
Advertisement
User's Guide
3. Click EPSON Status Monitor.
Ink Cartridge Code
The following is the code for genuine Epson ink cartridge.
372
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
Note:
Ink cartridge codes may vary by location. For the correct codes in your area, contact Epson support.
Related Information
"Technical Support Web Site" on page 136
&
Ink Cartridge Handling Precautions
Read the following instructions before replacing the ink cartridge.
Handling precautions
❏ Store ink cartridges at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink cartridge before the date printed on the package.
❏ For best results, use up ink cartridge within six months of opening the package.
❏ For best results, store ink cartridge packages with their bottom down.
❏ After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least three hours before using it.
❏ Do not open the ink cartridge package until you are ready to install it in the printer. The cartridge is vacuum
packed to maintain its reliability. If you leave a cartridge unpacked for a long time before using it, normal
printing may not be possible.
❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or
you may not be able to print. Do not remove or tear the label on the cartridge; this can cause leakage.
Replacing Ink Cartridges and Other Consumables
71
Advertisement
Table of Contents
