Table of Contents
Advertisement
User's Guide
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
"Loading Paper in the Rear Paper Feed" on page 32
&
Several Sheets of Paper are Fed at a Time
❏ Load one sheet of paper at a time.
❏ Fan the paper before loading.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
No Paper Feeds
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide. If the paper still does not feed, load one sheet
of paper at a time.
❏ If you have the cleaning sheet, use it to clean the roller inside the printer.
Related Information
"Available Paper and Capacities" on page 31
&
"Cleaning the Paper Path" on page 83
&
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
❏ When you cannot turn on the printer when running on battery power, the battery may be running low. Connect
the AC adapter, or charge the battery for more than 30 minutes and then turn on the printer again.
Power Does Not Turn Off
Disconnect the AC adapter and the USB cable. Hold down the
more than seven seconds, and then release both the buttons. To prevent the print head from drying out, turn the
printer back on and turn it off by pressing the
Solving Problems
P
button and the
P
button.
109
y
button at the same time for
Advertisement
Table of Contents
