Table of Contents
Advertisement
User's Guide
❏ Make sure the printer port is selected correctly in Property > Port from the Printer menu as follows.
Select "USBXXX" for a USB connection, or "EpsonNet Print Port" for a network connection.
Checking the printer status from the computer (Mac OS X)
Make sure the printer status is not Pause.
Select System Preferences from the
double-click the printer. If the printer is paused, click Resume (or Resume Printer).
Related Information
"Connecting to a Computer" on page 18
&
"Installing Applications" on page 102
&
"Canceling Printing" on page 65
&
Cannot Make Network Connection Settings
❏ Turn off the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the
devices in the following order; access point, computer or smart device, and then printer. Move the printer and
computer or smart device closer to the access point to help with radio wave communication, and then try to
make network settings again.
❏ Select Setup > Network Settings > Connection Check, and then print the network connection report. If the
report shows that the network connection failed, access the website from the QR code or URL on the network
connection report, and then solve the problem.
Related Information
"Messages and Solutions on the Network Connection Report" on page 26
&
Cannot Connect from Devices Even Though Network Settings are
No Problems
If you cannot connect from the computer or smart device to the printer even though the network connection
report does not show any problems, see the following.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
111
Advertisement
Table of Contents
