PM-525
Start Here
Read these instructions before using your product.
1
Unpack
Note:
Do not open the ink cartridge package until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials from the product.
Caution:
Do not touch the flat white cable.
2
Turn on and configure
1
Connect the AC adapter to the back of the product. Then
connect one end of the power cord to the AC adapter and
the other end to an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Move the handle behind the printer, lower the output tray,
and open the printer cover.
3
Raise the control panel and turn on the product.
Note:
If an error message appears, turn off the product and
check that no protective material has been left inside the product.
4
Press
or
to select your language, then press the OK
button.
Note:
You can change the language later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink cartridge
Caution:
Keep ink cartridges out of the reach of children and don't
drink the ink.
1
Unpack the initial ink cartridge and completely remove the
yellow tape only.
Caution:
Do not remove any other labels or seals, or ink
may leak.
2
Remove the plastic base and carefully dispose of it.