Epson PM-520 series User Manual page 20

User's Guide
Connecting to a Smart Device
You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the
smart device. To use the printer from a smart device, set up from the following website. Access to the website from
the smart device that you want to connect to the printer.
http://epson.sn > Setup
Note:
If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the
computer first.
Making Wi-Fi Settings from the Printer
You can make network settings from the printer's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using. If you know the information for the access point
such as SSID and password, you can make settings manually. If the access point supports WPS, you can make
settings by using push button setup.
After connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
"Making Wi-Fi Settings Manually" on page 20
&
"Making Wi-Fi Settings by Push Button Setup" on page 21
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 22
&
"Making Wi-Fi Direct Simple AP Settings" on page 23
&
"Making Advanced Network Setting" on page 23
&
Making Wi-Fi Settings Manually
You can manually set up the information necessary to connect to an access point from the printer's control panel.
To set up manually, you need the SSID and password for an access point.
Note:
If you are using an access point with its default settings, the SSID and password are on the label. If you do not know the SSID
and password, contact the person who set up the access point, or see the documentation provided with the access point.
1. Select Wi-Fi setup on the home screen, and then press the OK button.
2. Select Wi-Fi (Recommended), and then press the OK button.
Network Settings
20