Scott Edge Reinforcer Instruction Manual page 60

Fig. 4-15. Slide Lower Cut Off From Shaft
Fig. 4-16. Remove Upper Cut Off Mounting
Screws and Clamps
Fig. 4-17. Remove Upper Cut Off
Edge Reinforcer Issue 1
Step: 8. Slide the lower cut--off assembly from its
shaft.
Step: 9. Remove the two socket head screws and
round clamps which hold the upper
cut--off assembly in the front plate of the
gear box housing.
Step: 10.Pull the assembly toward front of
machine to remove. It may be
necessary to rotate or wiggle it to
remove.
4 Maintenance
4- -11