Table of Contents
Advertisement
Fig. 3-17. Push the Feed Button
Fig. 3-18. Turn the Drive Switch to ON
Fig. 3-19. Tape Ready to Apply
Edge Reinforcer Issue 1
Step: 4. Push the Feed button.
Step: 5. Feed a single sheet of standard size
paper into the machine. This will cause
the end of the strip of tape to be drawn
around the strip applying roller.
Step: 6. Turn Drive switch to on.
Step: 7. Remove the piece of self adhesive tape
from the roller and use it to fasten the
end of the tape to the sheet of paper.
Step: 8. The machine is now threaded and is
ready to apply the polyester tape.
Note: Shown with guard removed for
clarity.
3 Operation
3- -11
Advertisement
Table of Contents
