Table of Contents
Advertisement
2.1
Installation Requirements
Fig. 2-1. Scott Edge Reinforcer on Shipping Skid
All procedures in this section provide advance planning and site preparation data for installation of the Scott
Edge Reinforcer. Environmental requirements, unpacking instructions, electrical and physical specifications
are included. This information should be used as a reference during the development of site preparation
plans before you install your machine.
If any questions arise while performing any of the following procedures, contact:
Note !
A forklift is required to lift the machine off the shipping skid and place it on the floor.
Edge Reinforcer Issue 1
2 Installation
Scott-Precision
Tel.631.468.8776
Fax.631.468.8775
www.scottprecision.com
2- -3
Advertisement
Table of Contents
