Measurement Data Storage; Editing The Measurement Data Storage - wtw Multi 9420 Operating Manual

Data storage
Editing the
data storage
Settings
104

10.3 Measurement data storage

10.3.1 Editing the measurement data storage

The contents of the manual or automatic measurement data storage can be
shown on the display.
Each of the measurement data storages has a function to erase the entire
contents.
The storage is edited in the menu, Storage & config / Data storage. To open
the Storage & config menu, press the <ENTER_> key in the measured value
display.
Open the manual or automatic storage directly with the <RCL> or <RCL_> key.
The settings are explained here using the manual data storage as
an example. The same settings and functions are available for the
automatic data storage.
Menu item
Data storage /
Manual data storage /
Display
Data storage /
Manual data storage /
Output to USB flash
drive or printer
Data storage /
Manual data storage /
Output to RS232/USB
Data storage /
Manual data storage /
Erase
Setting/ Explanation
function
- Displays all measurement datas-
ets page by page.
Further options:
 Scroll through the datasets
with <><>.
 Output the displayed dataset
to the interface with <PRT>.
 Quit the display with <ESC>.
- Outputs all stored measured val-
ues to the USB-A interface (USB
memory device/USB printer)
- Outputs all stored measurement
data to the USB-B interface (PC)
- Erases the entire manual mea-
surement data storage.
Note:
All calibration data remain stored
when this action is performed.
Multi 9420
ba75964e04 04/2015