Storing The User Code - eKey home series Operating Instructions Manual

Storing the
user code
50│en
The system enables a maximum of 99 user codes to be stored.
A user code is any pin code which is used for triggering an action on the
control panel, e.g., opening a door. The user code may contain between 4
and 8 digits. The digits cannot all be the same; at least one of them must
be different.
To ensure the access control system remains secure, please remember
the following when selecting a user code:
□ Use long user codes
□ Use only numbers if possible
□ Do not use trivial codes.
The user codes are stored via the Admin menu. Enter the admin code to
access the Admin menu.
See "Entering the admin code", page 41.
The system is in the Admin menu.
Step Action
1st
2nd
3rd
4th
NOTICE
Description
Press 1 and then the
number of the
required relay (1 or
2).
Press ✓.
Enter the required
user code on the
keypad.
Press ✓.
The user code is
already present.
Enter the admin code
from the beginning
again.
Display
Status LED lights
up green on the
left.
Status LEDs light
up green.
- -
Status LED lights
up green on the
right.
Status LEDs light
up red.
- -